Pepperl+Fuchs KCD2-SR-Ex2 Dual-channel digital input safety barrier / 216720
Brand :
PEPPERL+FUCHSThe KCD2-SR-EX2 is a dual-channel digital input safety barrier (also known as a switching amplifier) from Pepperl+Fuchs (P+F) of Germany.
It is primarily used in industrial automation to safely and reliably isolate and transmit digital signals from hazardous areas (such as flammable and explosive environments) to safer areas.

| Brand | Pepperl+Fuchs |
| Model / Part Number | KCD2-SR-EX2 |
| Material Number (MNR) | 228736 |
| Rated Voltage | 19...30 V DC |
| Rated Current | ≤ 46 mA |
| Power Consumption | ≤ 900 mW |
| Ripple | ≤ 10% |
| Operating ambient temperature | -40 ... 70 °C |
| Protection rating | IP20 |
| Dimensions | Width 12.5 mm × Height 119 mm × Depth 114 mm |
| Mounting method | 35 mm DIN standard rail mounting |
Q: In what scenarios is KCD2-SR-EX2 primarily used?
A: Simply put, the KCD2-SR-EX2 is a very standard and reliable solution for any factory or environment with explosion-proof requirements where it is necessary to safely transmit "on/off" signals from switches, valves, sensors, etc., back to the control room.
Q: What are its advantages compared to similar models?
A: If you need a switchable safety barrier that requires no complex grounding, has strong anti-interference capabilities, and can directly drive large AC/DC loads, the KCD2-SR-EX2 is an ideal choice.
Q: What are its main drawbacks or limitations?
A: If your application requires extremely high response speed (>10Hz) or requires extremely frequent switching actions (tens of thousands of times per day), the KCD2-SR-EX2 may not be the best choice (in which case, a transistor output safety barrier is recommended). However, in applications such as conventional level limiting and valve switching status monitoring where speed requirements are not stringent and direct driving of AC loads or high interference immunity is required, these "disadvantages" usually will not be obstacles in practical applications.
leave a message
Scan to Wechat :
Scan to WhatsApp :